Supply of Cable Connectors and Repair Sleeves

The management board of 'Electrodistribution Networks West' EAD is initiating an open public procurement procedure for the supply of cable connectors and repair sleeves. This procurement is aimed at acquiring heat-shrinkable cable connectors for 0.6/1 kV cables with PVC insulation and sheath, ranging from 16 mm2 to 240 mm2, as well as heat-shrinkable repair sleeves with a steel profile for cables up to 240 mm2 with PVC/PE protective sheath. The heat-shrinkable cable connectors are designed to connect two four-core cables with a nominal voltage of 0.6/1 kV, featuring aluminum conductive cores without concentric laying, with PVC insulation and sheath. The heat-shrinkable repair sleeves consist of a heat-shrinkable rectangular sheet made from a chemically resistant elastomeric insulating material, with a thermofusible adhesive layer on the inside, covered with a protective film. The sheet is secured to the cables using a corrosion-resistant metal profile. The estimated quantities for the supplies are as follows: 1. Cable connector for 0.6/1 kV-16-50 mm2 - 900 pcs. 2. Cable connector for 0.6/1 kV-70-150 mm2 - 600 pcs. 3. Cable connector for 0.6/1 kV-185-240 mm2 - 1,100 pcs. 4. Heat-shrinkable insulating tube for conductive cores 16-50 mm2 - 20 pcs. 5. Heat-shrinkable insulating tube for conductive cores 70-150 mm2 - 50 pcs. 6. Heat-shrinkable insulating tube for conductive cores 185-240 mm2 - 20 pcs. 7. Repair sleeve with zipper for cables 4x16-4x95 mm2 - 700 pcs. 8. Repair sleeve with zipper for cables 4x120-4x240 mm2 - 1,300 pcs. 9. Repair sleeve with zipper for cables 6/10 kV - 1x95 mm2 - 20 pcs. 10. Repair sleeve with zipper for cables 6/10 kV - 1x185/240 mm2 - 20 pcs. 11. Repair sleeve with zipper for cables 12/20 kV - 1x95 mm2 - 20 pcs. 12. Repair sleeve with zipper for cables 12/20 kV - 1x185/240 mm2 - 300 pcs. The evaluation of technical and price proposals will be conducted before reviewing compliance documents, as per the regulations.